Tools/Maintenance

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

Finish Line's Mineral Brake Fluid is formulated specifically for bicycle brake systems requiring mineral oil. Features no compromise leading edge chemistry to provide superior fluid life and braking performance. Formulated with a low viscosity base oil to yield superior level response, pad retraction, and consistent performance through a full range of operating temperatures. Finish Line Mineral Brake Fluid was specifically engineered for use in bicycle hydraulic disc brake systems. When you are serious about getting the most out of your braking system, Finish Line Mineral Brake Fluid is a great choice. - Specifically engineered for use in bicycle hydraulic disc brakes - Provides maximum fluid life and braking performance, even at low temperatures - Prevents foaming and overheating

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

The Finish Line Absorb-It Mat is the perfect way to keep any work area clean. Designed with special absorption fiber technology, the Absorb-It Mat absorbs and traps chain lubricants, cleaners, degreasers, brake fluid and hydraulic oils. The combination of absorption fibers and a leak-proof poly liner make the Absorb-It Mat perfect accessory when degreasing & lubricating bicycle chains. Use the Absorb-It on a work bench, under an automobile to catch leaking fluids, in a car trunk to prevent stains, in a chemical storage cabinets, or under a trainer to catch perspiration. The Absorb-It Mat comes in two different sizes: Small (48" X 18") and Large (60" X 36"). The 48" x 18" will absorb and trap up to 11L of fluids. The larger 60" x 36" will absorb and trap up to 2.5L of fluid. Both mats can be cut with a scissor to fit in custom areas.

Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

- Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors

Regular chain and component cleaning is a chore no more with Finish Line's Starter Kit 1-2-3. It starts with Finish Line's popular Multi Degreaser for cleaning, and their versatile Grunge Brush. The "horseshoe" end scrubs the chain thoroughly with its compact bristles and the long bristled end provides easy cleaning of sprockets, chainrings, pedals and derailleurs. Plus, the Grunge Brush is portable enough to bring to races and weekend cycling excursions too. Then, after cleaning, get your bike running smoothly and silently again with the included Finish Line Dry Teflon lube and you're good to go!

Park Tool's CTP-4K includes four replacement chain tool pins and one 5/32" ball bearing. To replace the chain tool pin, unscrew the cap, and pull out the old pin. Use care not to lose the ball bearing beneath the pin. Install the new pin and replace the cap. Works with the CT-4.3, CT-4.2, CT-4, and CT-11

E-Bike Chain Wax uses the same proven and trusted, biodegradable wax/water emulsion technology as normal Squirt Chain Lube and is fortified with specialized high-pressure friction modifiers. - Slightly more slick than the original chain lube as this enables E-Bike Chain Wax to handle higher torque pressure and last longer in wet riding conditions than other wax based lubricants - Does not attract dirt or grime to your chain and no degreasing is required or recommended - 100% biodegradable

- Frees seized parts - Disperses moisture to prevent rust and corrosion - Provides light lubrication for moving parts - Reduces metal-to-metal contact - Prevents dirt adhesion - Cuts down on friction to improve component efficiency

- Cleans and polishes painted, anodized, and plastic surfaces - Loosens dirt and grime for easy cleaning - Sprays on and wipes away quickly and easily - Carnauba wax creates a long lasting protective shine

Our Classic ORIGINAL chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. - “Riding in” forms an extremely low-friction plating. - Plating bonds to chain; can’t be washed off! - Components stay cleaner, last longer, and run quieter. - Extremely durable, outlasts all other chain lubes! - Environmentally sensitive and saves money. - To be applied sparingly unlike many other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Original BCL is more concentrated for exceptional durability under the most challenging conditions. The two formulas are compatible and may be used interchangeably. We recommend the Original Bicycle Chain Lube for mountain bikes, cyclo-cross, and more extreme conditions. You can confidently use Dumonde Tech’s Bicycle Chain Lube on all cables, pivots points, and seals. Safe on plastic, rubber, all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in the extreme cold conditions..

Shock Oil is a semi-synthetic formulation that combines the best of available oils and additives for a super suspension oil. It's fully compatible with all systems and internal components, seals and O-rings. Its viscosity stays constant as the temperature changes, so your shock feels the same whether you're roasting or freezing!

Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding

- Consumer grade water-based silicone bicycle polish - Safe on all parts including carbon - Protects against uv rays, water and dirt

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

Finish Line® 1-Step™ is perfect for commuters and recreational cyclists seeking a quick and easy clean and lube solution. 1-Step™ loosens and removes surface grime, before leaving behind a clean, low-friction film of high-performance lubricant. 1-Step Cleaner & Lubricant helps prevent premature component wear, reduces pedaling friction, and eliminates drivetrain noise. It’s formulated with corrosion inhibitors that provide excellent rust protection in extreme conditions and coastal salt-air. 1-Step™ does not compromise on its ability to reduce pedaling friction over long intervals. • Fast and easy application • Cleans and lubricates chains in one simple step • Penetrates to flush out old lube and contaminants • Leaves behind a low-friction film of high-performance lubricant • Reduces friction, prevents chain wear, protects components • Can be applied to both clean or dirty bicycle chains • Provides maximum rust protection, even in salt-air • Ideal for commuters and cyclists on the go • Apply to bicycle chains before putting into storage

The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings

Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.

RockShox Volume Reducer Kits

- Handy tool to have to easily install your KMC MissingLink. - Easy to handle! - Very comfortable!

Park's FR-8 Freewheel Remover fits flip-flop BMX hubs with 30 x 1mm threads. It can be held with a wrench or vise, and its narrow profile allows use without removal of cones and locknuts.

The TL-6.2 is a composite covered, steel core tire lever that provides smooth, scratch-free operation and superior strength to help remove even the tightest tires. Newly upgraded with a tougher, more slippery material and a protruding steel tip to more easily and securely engage the tire bead. A perfect size (5"/12.7cm) to either take-along, or use as an everyday shop lever. Set of two.

A great way to make cleaning easier is to remove your wheels. While this may seem excessive, removing the wheels from your bike opens up many tight areas that are tough to clean, allowing easier access and better visibility of these surfaces. The Pedro's Chain Keeper was designed with this wheels-off technique in mind and makes sure your chain stays off your frame, preventing damage and keeping your drivetrain free to turn as is commonly needed during cleaning. Try it out! The Chain Keeper inserts into the right rear dropout when the wheel is removed for cleaning, storing, or transporting your bike. The quick-release lever allows for fast and easy installation and removal.

Finish Line's Chill Zone works like magic to loosen and free rusted parts! Before discarding your rusted chain or giving up on a frozen crank bolt, a sticky derailleur, or a seized seatpost, give Chill Zone a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. Chill Zone has a special refrigerant that freezes metal as low as -50°F/-45°C contracting it and breaking the rust bond. Then Chill Zone's penetrant breaks down and flushes out the rust. With Chill Zone, most rusted parts quickly regain full functionality. Plus, it lubricates, too, so you don't need to add any.

Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime

Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.