Cables

Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have knurled rubber-coated rings for easy turning by hand.

- HFX-9 kit includes a pre-crimped inline caliper fitting - Sole and Stroker Ryde kit includes specific fittings for lever and caliper

These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1

Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease

Jagwire's Universal Sport Shift Kits are the perfect way to enhancing shifting performance and precision and add style to your bike, too. Compatible with Shimano, SRAM, and Campagnolo systems, the slick stainless cables provide smooth, precise shifts, excellent durability and corrosion resistance. And with the housing and all the needed parts included, these kits are easy to install and ready to deliver years of flawless gear changing.

The Quik Slic is a patent pending, all-in-one, cable design. This means that the cable, cable hanger and straddle cable are all manufactured as one unit. In addition to providing an incredibly easy assembly, the braking response is greatly improved as a result of eliminating the traditional cable “bend” and tightening points that are usually found on a normal straddle hanger. You can feel the difference as soon as you pull the lever. Quik Slic-equipped complete bikes have been shipping since late 2011, and the response from bike shop employees is universal. The assembly is a piece-of-cake, and braking performance improves immediately. Every Quik Slic uses Odyssey's improved K-Shield Linear housing assembly.

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

This aluminum link housing is the ultimate combination of durability and attention grabbing looks. It's designed to enhance your performance and appearance. So, why is it better than traditional housing? It's compressionless, which means precision shifting. But its flexibility allows for tight bends without kinking. It's also much lighter than traditional linear strand housing while being more durable. Combine these benefits with Jagwire's Elite, ultra-slick polished cables and Slick-Lube liners that dramatically reduce friction and you’ve got the best of performance and style. - Precise, compressionless shifting performance combined with extreme flexibility - Each kit comes with links pre-installed on housing segments making setup quick and simple - 20% lighter than traditional linear strand shift housings - Durable, ultra-slick polished inner cables minimize system friction - Aluminum housing won't kink or rust. - 20th Anniversary Limited Edition Black kit (RCK755) has black link segments; the kit includes 6 additional accent links of each color including gold, silver, red, and blue

- Steel cable noodle with alloy end caps - Includes plastic liner

- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually

- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut

Jagwire's Universal Pro End Cap Packs contain a complete selection of aluminum housing ferrules and cable end caps (crimps) so that you can properly setup your cables and housing sections and prevent fraying cables. They come in 6 colors for customizing your ride, too.

• MTB or Road • 1.5 x 1855mm • Galvanized

Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.

Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.5mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Hayes brakes and includes enough hardware for one bicycle.

Jagwire's Lined End Caps are nice ferrules designed for the ends of brake cable housing sections. They feature a small nylon extension on the end that helps reduce friction and adds protection for coated cables, too. You get a bottle of 50 for all your bicycle setup needs.

- Rubber - Color: Black

Shimano Stainless Road/MTB Brake Cable & Housing Sets - 1 x 2000mm black 5mm housing - 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables - 2 end caps and 2 cable crimps

Jagwire's Cable Guide Stoppers are rubber adapters that fit over hydraulic brake lines so that the lines will fit into various open-type frame cable-housing stops and stay securely in place. You get a pack of 50.

Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.

Jagwire's Universal Sport Shift XL Cable Kit is the perfect way to enhance your shifting performance and precision while adding some style to your bike, too. The cables and housings in this kit are extra long and there are anti-kink end caps, so it's a great kit for longer-than-usual cable-routing setups and folding bikes. The cables are made of stainless steel for excellent durability and corrosion resistance. They fit Shimano and SRAM shifting systems. And with all the needed parts included, this kit is easy to install and ready to deliver years of flawless gear changing.

Jagwire's Universal Pro Non-Crimps are a custom finishing touch for the ends of your brake and shift cables and prevent them from fraying so the cables keep functioning. Also, because they're not crimped in place and go on/off without tools, you can easily remove them for holding the ends of the cables to make adjustments. Best of all, the Non-Crimps are made of soft, safe rubber and they come in colors so you can add some more style to your ride.

Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation

Jagwire's Hydraulic Fittings Combo Box is a handy parts box for your home shop that includes a variety of common fittings and seals for a range of disc brakes from Avid, Formula, Hayes, Magura, Shimano and Tektro.

- Indexed barrel adjusters compatible with Shimano STI road shifters - Allows for derailleur adjustments from the handlebars

- Specific tool designed for connecting and disconnecting EPS cables

- 50 feet (15.2 meters) length - 5mm diameter cable housing - For brake cables

• Stainless steel shifter cable • PTFE-coated for reduced friction • Length: 2000mm