Accessories

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

- RockShox, 11.4118.038.000, Service kit, Monarch B1RL C1 R, RT, RT32014+

- Makes braking and shifting super smooth by reducing the drag in cable housings - Law prohibits ORM-D materials from shipping by air

Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt. - For road bikes only

Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding

Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously

Protect your chainstay and other wear areas from harsh chainslap and other frame damage maintaining your bike's strength and beauty. The rubberized strip is 50mm wide and each roll is 1000mm long. Wrap up the stay or trim a custom shape to protect the frame. RideWrap protection accessories are made with high-quality RideWrap materials that are bike-tested for long-term durability. All RideWrap protection accessories have been designed to give riders leading protection for their dollar. - Matte black finish - Fits all makes, models, and sizes - Protects from harsh chainslap and other damage - 50mm x 1000mm roll - Designed around mountain bike geometry - Kit includes instructions and pre-install cleaning wipe

- Inventive storage solution that hangs the bike at a 25° from the wall by supporting the bike at the tires and pedal rather than the frame - Due to the angled nature, 3 bikes can be hung on an 8` tall wall freeing up room for other decor or more bikes - Compatible with clipless and platform style pedals with both 9/16" and 1/2" axles - Vinyl coated pedal bracket to keep pedal and crank from getting scratched

Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

Somewhere between the excitement of competition and recovery, it can be easy to misplace things. With Profile's Aerodrink Parts Kit you can replace both straws, the mesh sponge and the two rubber bands that keep your Aerodrink ready for your next event.

The Universal Aerodrink Bracket fastens quickly and easily to your aerobar extensions using secure Velcro straps. It's compatible with Profile Design's Aerodrink, Insulated Aerodrink, and Aquacell systems (all sold separately).

Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments. - Lightweight alloy headset spacer with nylon body (9g) - Compatible only with Shimano Di2 Junction Box - 95mm length, 44mm width, 6mm height - 6 Degree angle

On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage. -45mm of adjustability -28 oz water bottles max -Constructed of AL-6061

- Consumer grade water-based silicone bicycle polish - Safe on all parts including carbon - Protects against uv rays, water and dirt

PowerTap's Bluetooth Smart Dual Speed/Cadence Sensor gives you the ability to monitor your speed and cadence with your favorite Bluetooth-compatible device. It's sleek and easy to mount on your frame.

Discover freedom with Cenote – the first disposable hydration system with recyclable reservoirs. Durable, but priced for a single use, Cenote makes cleaning optional. So, go ahead use your system however you want, for as long as you want. And when you’re ready, just replace with a fresh Cenote reservoir. - Disposable/ fully recyclable - Fits most backpacks - Premium, high flow 360-degree locking bite valve - Removable cap gasket for easy cleaning -Lightweight and easy to fill - BPA free, and no chemical coatings - Replacement components sold separately - Wide mouth opening is easy to fill, and fits hand-held filtration systems and Polar Bottle caps

Planet Bike's Dial Gauge makes it easy to ensure you always have the right pressure in your tires, which makes the riding easy and helps prevent flats. Built to last, this quality gauge works on all valves and has a large easy-to-read dial.

Cage mounted amber side light Be seen from the side when you’re on the go with the Bottle Blinky. It mounts discreetly under your waterbottle cage but provides dynamic side visibility in three flavors: steady, Courtesy pulse and Superflash. - 6 high output surface mounted amber LEDs provide steady, Courtesy & Superflash modes - FL1 Tested - Run times: 24 hrs (steady – 7 lm), 27 hrs (Courtesy – 3-7 lm) and 106 hrs (Superflash – 7 lm) - Amber side lights provide 150° of side visibility on each flank - Highly visible, even in daylight - Dust & water resistance rated to IP64 standard - 2 AAA batteries (included) - Mounts to water bottle mounts on downtubes and seat tubes - 58 grams

High-pressure shock pump with gauge Our Shockmate 3.0 high-pressure bicycle suspension pump is designed to efficiently and accurately maintain your bike’s suspension to ensure that your shocks are neither too stiff nor too soft. It's compact and rugged and features an 8" swivel hose and alloy valve head for secure attachment and easier pumping. The easy-to-read gauge and bleeder valve help you fine-tune the suspension sag on your bike's front and rear shocks to give you the best ride performance. Whether you have a mountain bike with full suspension or just a fork shock, take the Shockmate 3.0 along on your next backcountry adventure. - Compact and rugged design is ideal for backcountry adventures - Locking T-handle for comfortable and efficient pumping at high pressure - 8" swivel hose and alloy valve head for secure attachment and easier pumping - 1.5" industrial grade gauge is precise and easy to read when setting suspension shock sag - Bleeder valve for fine-tuning pressure - Rebuildable - Length: 260mm - Weight: 149 grams

- Head rebuild kit for current Super Prestige floor pump. Includes cap and gasket.

A great way to make cleaning easier is to remove your wheels. While this may seem excessive, removing the wheels from your bike opens up many tight areas that are tough to clean, allowing easier access and better visibility of these surfaces. The Pedro's Chain Keeper was designed with this wheels-off technique in mind and makes sure your chain stays off your frame, preventing damage and keeping your drivetrain free to turn as is commonly needed during cleaning. Try it out! The Chain Keeper inserts into the right rear dropout when the wheel is removed for cleaning, storing, or transporting your bike. The quick-release lever allows for fast and easy installation and removal.

- Innovative chain retention hook locks tool onto cassette, ensuring full chain wrap and eliminating slippage. - Tool geometry offers maximum effective leverage and compact 270mm length. - Compatible with all multi-gear cassettes including 12-Speed. Chain retention hook fits cogs up to 18 teeth. - Integrated fixed gear lockring wrench optimized for 41-42mm OD lockrings. Pedro's new Pro Chain Whip takes inspiration from our beloved Vise Whip, applying many of the same functional principles to a more traditional chain whip design. The Pro Chain Whip design focuses on functionality, practicality, and safety. The innovative chain retention hook offers multiple benefits. First it keeps the chain secured to the tool during storage. Secondly, it improves user safety by locking the tool onto the cassette, ensuring full chain wrap and eliminating slippage. An added bonus of this feature is that the tool stays in place on its own. No more fumbling with your cassette lockring tool with one hand while trying to keep your chain whip in place. Being attached to the cassette, the Pro Chain Whip can also be used to slide the cassette off the hub. A nice option when dealing with grimy gears. Keeping traveling mechanics and portability in mind, the Pro Chain Whip geometry maximizes effective leverage while keeping the tool length to a compact 270mm and 225g weight. The integrated fixed gear lockring wrench, optimized for 41-42mm OD lockrings, adds versatility and is one less tool to carry. The Pro Chain Whip is compatible with all multi-gear cassettes including 12-speed, and the chain retention hook fits cogs up to 18 teeth.

Bushings and spacer designed for use with Pedro's Headset and Bearing Press. - Includes ten precision-machined bushings in 6 sizes covering installation of all road, mountain, and BMX press-fit bottom brackets cups and bearings, plus a BB Bushing Spacer for enhanced flexibility, speed, and alignment - Bushings and spacer designed for use with Pedro's Headset & Bearing Press ensuring precise and accurate installation. Inner diameter of 18.4mm (14mm for 19-37 and 19-41) - EVA foam packaging insert keeps the bushings protected, organized, and ready for use

Park Tool Storage Hooks are pefect for hanging bikes, wheels, etc. • Vinyl coated to prevent scratching. • Machine threaded - includes 2 nuts • Made from 7mm steel rod • Thread is a M8 x 1.25 44mm length

Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs