Tools/Maintenance

- Adjusts rear wheel for centering in frame - Size: 3/8" - Color: Silver

Tools for repair and maintenance of RockShox Reverb suspension seatposts. - Specific to RockShox Reverb post

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

Specially formulated low-friction lubricant for the seals and bushings of the air chamber for front and rear Fox Racing Shox. Float Fluid is the recommended lube for use with Fox forks and shocks. - Use when rebuilding Fox suspension to lubricate foam rings and seals - Corrosion inhibitor

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs

Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.

The new B-gap adjustment tool is simple and easy to use, allowing for a quick set up experience. Small enough to be able to pack in your ride bag or stash in your toolbox for repeated use, it is also industrially recyclable if you find you no longer have use for it. This is the most precise tool for setting up and adjusting your drivetrain.

• Fits 10, 11, 12, 13, 14, and 15 gauge spoke nipples

- Designed for a perfect fit on Giant WheelSystems - Safe for use on carbon rims - Ideal size for storage in saddlebags or pockets - Ergonomic shape makes it easy to remove tire - Reinforced nylon for best durability

Park Tool's Derailleur Clutch Wrench is a small, thin wrench with 5.5mm and 3mm openings designed to fit the rear derailleur clutch tension adjuster on Shimano XT, SLX, Deore, Saint and Zee rear Shadow Plus (+) derailleurs and all previous Shadow Plus models.

Finish Line® Dry Lube is the bicycle industry's original and most versatile dry-style chain lubricant. It is formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free and sets up with a dry ‘wax-like’ film. It attracts less grime and delivers a low coefficient of friction over long re-lubrication intervals. It is ideal for riding on or off-road, in dry, dirty, dusty environments, and also holds up well in wet conditions. Designed for chain applications, it can also be used on derailleurs, shifters, cables, and brake pivot points. Dry Lube delivers optimum drivetrain efficiency without attracting excessive amounts of abrasive contaminants. • Formulated with Non-Stick Ceramic Technology • Lowers friction, improves pedaling efficiency, reduces wear • Quickly sets up dry and clean • Minimizes the attraction of abrasive contaminants • Low surface tension easily penetrates chain pins • Biodegradable and 100% fluoro-free

- Makes braking and shifting super smooth by reducing the drag in cable housings - Law prohibits ORM-D materials from shipping by air

Get those heads sealing like new and reduce compressor energy waste with Park Tool's Head Seal Kit. This kit will help get rid of that hissing sound you've been hearing when it has been too long since servicing your Park Tool INF-1 or INF-2 shop inflator. Kit includes: - 1 #1586 Presta Seal - 1 #1588 Schrader Seal - 2 #1576-2 O-rings for Shuttle-valve - 1 #1682-2 O-ring for INF-1 and INF-2 Head Adaptors

Crank Brothers puts their well-known design aesthetic to the humble tire lever with the Speedier Lever. Can we call a single piece of nylon revolutionary? First off, this thing is tough. It removes and installs wire-beaded DH tires, UST tires, and brand-new road tires easily, without breaking. The genius loop protects your knuckles! It installs tires too, without pinching the tube, just flip it and use the other side. And only one lever is needed to remove even the most recalcitrant tires. Oh Speedier Lever, where have you been all my life?

Giant's Control Patch Kit consists of 2 tire levers, 6 glueless patches, 4 vulcanized/glue patches, a tube of glue and some sandpaper. Buy a bunch of them and make sure you have 1 in every seat bag and hydration pack you own.

Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts.

Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts.

Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.

Finish Line's Premium Grease With Teflon is a race-proven lubricant formulated for the unique demands of bicycle bearings. It's exceptionally strong and thick, it doesn't separate and it repels water even when submerged. Rated "5 Chainrings, Exceptional Grease" by Bicycling Magazine, it's very slick and very tough and lasts as much as 5 times longer than petroleum grease.

- All Purpose Penetrating Lube - Forms A Protective Film On Metal - Provides Excellent Corrosion Protection - Displaces Water - Will Not Harm Plastic Or Painted Surfaces

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.

- Specially formulated 10wt mineral-oil fluid for Magura hydraulic disc and rim brakes (Blue color)

For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal. - Pack of 10, fits 9/16" pedals.

Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

- Frees seized parts - Disperses moisture to prevent rust and corrosion - Provides light lubrication for moving parts - Reduces metal-to-metal contact - Prevents dirt adhesion - Cuts down on friction to improve component efficiency

Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut

Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt. - For road bikes only

Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding

Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously

Finish Line's Mineral Brake Fluid is formulated specifically for bicycle brake systems requiring mineral oil. Features no compromise leading edge chemistry to provide superior fluid life and braking performance. Formulated with a low viscosity base oil to yield superior level response, pad retraction, and consistent performance through a full range of operating temperatures. Finish Line Mineral Brake Fluid was specifically engineered for use in bicycle hydraulic disc brake systems. When you are serious about getting the most out of your braking system, Finish Line Mineral Brake Fluid is a great choice. - Specifically engineered for use in bicycle hydraulic disc brakes - Provides maximum fluid life and braking performance, even at low temperatures - Prevents foaming and overheating

The Park FR-2 Freewheel Remover fits SunTour two-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel. (Not recommended for use with SunTour 4- and 6-notch freewheels.)

Finish Line® 1-Step™ is perfect for commuters and recreational cyclists seeking a quick and easy clean and lube solution. 1-Step™ loosens and removes surface grime, before leaving behind a clean, low-friction film of high-performance lubricant. 1-Step Cleaner & Lubricant helps prevent premature component wear, reduces pedaling friction, and eliminates drivetrain noise. It’s formulated with corrosion inhibitors that provide excellent rust protection in extreme conditions and coastal salt-air. 1-Step™ does not compromise on its ability to reduce pedaling friction over long intervals. • Fast and easy application • Cleans and lubricates chains in one simple step • Penetrates to flush out old lube and contaminants • Leaves behind a low-friction film of high-performance lubricant • Reduces friction, prevents chain wear, protects components • Can be applied to both clean or dirty bicycle chains • Provides maximum rust protection, even in salt-air • Ideal for commuters and cyclists on the go • Apply to bicycle chains before putting into storage

The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

- Biodegradable, non-toxic all-purpose cleaner - Fast-Acting cleaning agents lift away dirt while scrubbing grime and oil deposits - Specially engineered surfactants lower surface tension allowing better penetration and wetting of soils - Tough on dirt, yet gentle enough to use on delicate surfaces including paint, plastic, chrome, anodized finishes, rubber, carbon fiber, aluminum and magnesium - User friendly formula cleanly washes from the surface - Contains no harmful acids, CFC's or solvents.

• Small enough for any tool bag • Great for on trail repairs • HG chain compatible

- Quickly removes grease, oil, and other contaminants from electrical components - Propellant provides maximum spray pressure - Allow hot surfaces to cool before applying - Quick drying, leaves no residue - Safe for most plastics - Citrus scented - VOC compliant

Park's Spoke Wrench For Shimano Wheel Systems is the right tool for the job. It's made of durable tool steel and features 4.4mm and 3.75mm openings to fit all Shimano Wheel System nipples located at the hub and at the rim. It's vinyl-coated for a great grip, too.

Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant

Finish Line's Stanchion Fluoro Oil drastically reduces suspension fork "stiction" to improve your fork's freedom of movement. Stanchion Fluoro Oil is pure fluoropolymer oil — so slippery it even improves the surface slip of Teflon-coated surfaces! Plus, it conditions and protects seals and O-rings to help your fork work better longer. And, you can even use it on derailleur pivots and cables.

The Finish Line Absorb-It Mat is the perfect way to keep any work area clean. Designed with special absorption fiber technology, the Absorb-It Mat absorbs and traps chain lubricants, cleaners, degreasers, brake fluid and hydraulic oils. The combination of absorption fibers and a leak-proof poly liner make the Absorb-It Mat perfect accessory when degreasing & lubricating bicycle chains. Use the Absorb-It on a work bench, under an automobile to catch leaking fluids, in a car trunk to prevent stains, in a chemical storage cabinets, or under a trainer to catch perspiration. The Absorb-It Mat comes in two different sizes: Small (48" X 18") and Large (60" X 36"). The 48" x 18" will absorb and trap up to 11L of fluids. The larger 60" x 36" will absorb and trap up to 2.5L of fluid. Both mats can be cut with a scissor to fit in custom areas.

Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.

- Chain gauge for checking wear and stretch - Also includes an integrated assembly hook for making installing chains easier

- Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors

Keep your drivetrain quiet while protecting your components with Squirt Dry Lube. This long-lasting wax and water-based lubricant is low maintenance and easy to apply: no degreasing is needed, just squirt it on and ride. Squirt is 100% biodegradable and doesn't contain harmful solvents. Plus, it works in all-conditions, wet or dry, for mountain and road.

Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.

Because even your reliable Mavic wheels will eventually need truing, Park offers their Spoke Wrench For Mavic Wheel Systems. This comfortable, vinyl-coated, double-ended spoke wrench easily accesses and turns Mavic nipples. One end fits Mavic 6-spline, 9mm threaded eyelets and the other fits their 7-spline, 6.4mm nipples.

Finish Line's Chill Zone works like magic to loosen and free rusted parts! Before discarding your rusted chain or giving up on a frozen crank bolt, a sticky derailleur, or a seized seatpost, give Chill Zone a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. Chill Zone has a special refrigerant that freezes metal as low as -50°F/-45°C contracting it and breaking the rust bond. Then Chill Zone's penetrant breaks down and flushes out the rust. With Chill Zone, most rusted parts quickly regain full functionality. Plus, it lubricates, too, so you don't need to add any.

- Handy tool to have to easily install your KMC MissingLink. - Easy to handle! - Very comfortable!

Park's FR-8 Freewheel Remover fits flip-flop BMX hubs with 30 x 1mm threads. It can be held with a wrench or vise, and its narrow profile allows use without removal of cones and locknuts.

The TL-6.2 is a composite covered, steel core tire lever that provides smooth, scratch-free operation and superior strength to help remove even the tightest tires. Newly upgraded with a tougher, more slippery material and a protruding steel tip to more easily and securely engage the tire bead. A perfect size (5"/12.7cm) to either take-along, or use as an everyday shop lever. Set of two.

A great way to make cleaning easier is to remove your wheels. While this may seem excessive, removing the wheels from your bike opens up many tight areas that are tough to clean, allowing easier access and better visibility of these surfaces. The Pedro's Chain Keeper was designed with this wheels-off technique in mind and makes sure your chain stays off your frame, preventing damage and keeping your drivetrain free to turn as is commonly needed during cleaning. Try it out! The Chain Keeper inserts into the right rear dropout when the wheel is removed for cleaning, storing, or transporting your bike. The quick-release lever allows for fast and easy installation and removal.

Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.

RockShox Volume Reducer Kits

The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings