Maximize your visibility with this amazing taillight. The SuperFlash aims 2 extreme LEDs plus a half-watt Blaze LED for light that can be seen for up to 1 mile! The ultra-compact case is weatherproof, light and durable. And, the SuperFlash includes a bike mount and clip mount for multiple mounting options. Plus, the 2 AAA batteries (included) offer run times up to 100 hours.
Lil' Cobber Rear produces an incredible 330º of light, so you'll be clearly seen from all angles. In an increasingly busy world, this bike light is brilliantly effective at attracting attention and helping keep you safe on the road. Packing 50 lumens this Lil' Cobber is seriously bright. The Cobber has integrated USB recharging, is 100% waterproof and you can program the settings using the Modemaker app. It mounts with tool-less removable silicone straps for bars/seat posts 22 – 32mm+ diameter with magnetic mount (aero Mount also included). If you are looking for the best rear commuter bike light around, look no further. - Light modes: Max, Mid, Steady Pulse, Flash, Eco Flash come pre-programmed - LEDs: Efficient Chip on Board (COB) LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode - Integrated USB plug: No charging cable required, plugs directly into USB ports & is designed to be exposed to the elements - Charge time: 4 hours (LED will turn off when fully charged) - Battery: USB Rechargeable Lithium Polymer - Accessories included: Standard Mount, Aero Mount, 3x interchangeable straps for bars/seat posts 22-27mm / 28-32mm+, and USB extension.
Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)
- Detects when you are braking to emit a bright light alerting others you're stopping - Max 75 lumens / 19.5 hour runtime in Flash mode - New 400 mAh battery. Larger battery, longer runtimes - Wide angle optics with 270° visibility for maximum safety - Aero and round seatpost compatible - Lightweight and durable - IPX7 water resistant co-molded design
Topeak's RedLite II mounts on seatposts, seat bags and seatstays. Its 4 super-bright LEDs shine through a 220-degree, wide-angle, reflective lens to alert traffic approaching from almost anywhere. The RedLite's watch-style lithium batteries (included) offer up to 100 hours of run time. Plus, you can choose from constant or blinking mode.
Maintain Visibility All the Time. As with all the lights in the Recon series, the new Recon TL200 has a compact design, an integrated power indicator, complies with the ANSI standard and is IPX7 certified. Additionally, the smart light sensor can auto adjust the light output, day or night, to ensure you can be seen all the time. - Maximum output to 200 lumens - ANSI-Standard certified lumen output and runtime - Water proof to IPX7 standard - Two-lens focused and dispersed optics with side light design for over 270-degrees of visibility - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost and Prompt series helmets - Compatible with saddle rail mount, providing optimal angle for visibility
Compact and Versatile. The Recon TL100 is easy-to-use, ultra-portable and lightweight. With an integrated power indicator and IPX7 waterproof certification, the Recon TL100 provides maximum high-powered visibility at an accessible price. - Maximum output to 100 lumens - ANSI-Standard certified lumen output and runtime - Water proof to IPX7 standard - Disperse optics with side light design for over 180-degrees of visibility - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost and Prompt series helmets
Planet Bike's Superflash USB uses super bright LED's for visibility up to 1 mile. The ultra-compact case is weatherproof, light and durable, and features a soft-touch power switch. A USB-rechargeable lithium ion battery provides up to 36 hours of run time.
Giant's Numen Mini Lights are small, versatile, and bright. Both the headlight and taillight use super bright LEDs to make sure you're visible in low-light riding situations, and feature your choice of steady or flashing mode. The tool-free rubber mounting hardware is fast, easy to use, and fits nearly every handlebar and seatpost.
This is the “Next Generation” of our compact and versatile fast-mounting bike lights. Their mission: to help cyclists boldly go where no cyclist has gone before. - High output surface mounted LED provides steady, Courtesy, and Superflash modes - FL1 tested run time: 4.5 hrs (steady – 5 lm), 7 hrs (Courtesy™ 1.5-4.5 lm) and up to 22 hrs (Superflash - 5 lm) - Side cut outs provide 270° of visibility - Dust & water resistance rated to IP54 standard - 270 mAh lithium polymer battery charges in 2 hours with micro USB cable (included) - Diminutive size and fast mounting rubber strap mounts to multiple mounting locations in seconds without tools - 25 grams
• 180 hour run time • Includes one 2032 button cell battery • 4-Super bright LED`s • Multi-fit QR seat post mount • 2 mode (steady / flashing) • ROHS Certified • Water resistant
- 8 lumen safety tail light - Built in Li-Ion USB rechargable battery - 3 modes - 2 steady and 1 flashing setting - Multi fit rubber strap attachment - Low battery indicator
Put it on your seatpost, put it on your seatstays, put it anywhere, Sunlite's Griplite goes almost everywhere. This powerful little light has 4 LEDs and runs for 60 hours! It has steady and flashing modes and is housed in a water-resistant body.
- Flat COB chip rear LED light with 38 individual COB chips - USB rechargeable 300 mAh li-ion polymer battery - 7 modes including a high and low setting and 5 flashing settings - Daytime flash modes enhances safety in any conditions or time of day - Low battery warning and battery capacity indicator (double click button to check) - Mode memory and tool free installation - Mount: seatpost - Lumens: 20
The NiteRider Sentry Aero 260 is a lightweight, aero taillight featuring dual LED light strips to deliver 260 lumens of Daylight Visible red light. An inner and outer lens design helps to shape light output, producing long-range visibility when viewed directly from the rear, but also providing ample surrounding light to the peripheral, making the Sentry Aero 260 visible from nearly any angle. - Daylight Visible Flash (DVF) - 260 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off Aero seat post strap mount with quick release tab - Aero seat post strap included - Convenient USB rechargeable - Super bright Daylight Visible Flash mode - Innovative Aero shape with excellent side visibility - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentry Aero 260 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seat post Mount - USB Cable
Planet Bike's Spok Taillight ensures you'll be seen for up to a mile! It boasts a super-bright LED and a translucent casing that allows 220 degrees of visibility. The rubber strap can be used to mount the Spok on seatposts or odd shaped tubes of all sorts and sizes. And, this little baby runs up to 100 hours with the included CR 2032 battery. There's even a keychain hole for portability!
-PB power array and reflector provide visibility for up to 1 mile -Steady, Superflash and Courtesy flash modes -Ultra compact case is weatherproof, lightweight, and durable -Rear rack and seat post mounts included -Up to 150 hours of run time on 2 AAA batteries (included) -85 grams
Minimal and mighty! The USB rechargeable Asteroid tail light from Portland Design Works mounts in seconds and shines super brightly with high quality optics so you can be seen. The double-click lens prevents accidental ons and offs. Ride up to 35 hours before needing a charge. Pairs nicely with the Asteroid Headlight - also available as a light set. - 3 Modes (burn time): Flash (35 hrs), Pulse (6.5 hrs), Steady (4.5 hrs) - Weatherproof exterior for all season riding - Micro USB recharging cord included - Weight: 76 g (2.7 oz)
German StVZO optimized lens with wide light spread. Two high-output LEDs provide 12 lumens. IPX7 water resistant rating. Composite matrix construction. E-bike compatible (6v input, 0.4w / 12v input 0.8w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm-long power cable included. 50 and 80mm mount spacing. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included
The NiteRider Bullet offers excellent rear light projection and daytime visibility with Optimal VIZ. Keep tabs on battery life with the integrated low power indicator. - 200-lumen output - Group Ride Mode—be seen without distracting fellow cyclists - Varying steady and safety flash modes - USB rechargeable - FL1 Standard IP64 Water Resistant
German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included
The Vis 180 series redefined tail lights as the safest, most reliable platform available. The Vis 180 Pro continues this tradition by offering the brightest tail light on the market with a piercing 150 lumens of output. With a wide spread of red rear lighting combined with Light & Motion exclusive amber side lights for increased visibility at intersections, the Vis 180 Pro is the essential tail light for commuters. Featuring: - 150 Lumen output certified to the FL-1 Standard - Engineered with the highest-level CREE LED and enhanced firmware - Dual LED array to maximize visibility - Ultralight Aluminum body - Accurate battery charge and status indicator with 4 status levels - Custom engineered reflectors and optical solutions optimize the light to distribute red and amber light a full 180 degrees - Secondary LED spreads amber light for 180 degrees of visibility - Simple ratchet in/out adjustability - Slide lock system allows you to easily take on / off without tools - Integrated clip for attaching to backpack or messenger bag; - Bike rack mount available and sold separately - Micro USB Rechargeable (Fully charges in 5 hours) - Low battery warning and auto shut-off to prevent damage - Multiple power settings - HiPulse: 6:00 / 150 - LoPulse: 12:00 / 75 - Solid: 4:00 / 150 - Paceline: 32:00/ 5 - Ultralight system weight: 102 grams - Designed and Assembled in California - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee Included: - Seat Post Mount, Micro USB Charging Cable
- USB rechargeable super bright COB style LED light - 8 modes - 4 brightness levels each of both steady and flash - Charging and low battery indicator - Single button interface - quick press to change mode, long press to turn off and double tap to change mode, long press to turn off and double tap to change from steady to flashing - 3 hour charge time - Lumens: 100 - Mount: Rubber strap
High visibility is a must for anyone who spends a lot of time riding on roads. Lezyne's Zecto Drive Max 250 rear light ensures you are well seen in from the rear, day or night. With eight total modes from long-lasting economy mode to the 250-lumen output Daytime Flash mode, you can tailor this light's output to suit your needs at any time. It's ultra-compatc design features durable composite matrix construction with a machined aluminum faceplate and a versatile 2-in-1 clip and strap mounting system. - Micro-USB rechargeable
Stand out at night! The Blinky 3H combines 3 bright LEDs with a parabolic reflector for up to a mile of visibility. And, its self-leveling helmet mount ensures optimum visibility as you ride. It also includes seatpost and seatstay mounts. The Blinky 3H has steady and flashing modes and runs for up to 100 hours on the included AAA battery. Also, this light includes a reflective lens and side reflective strips for extra safety.
Simple operation with three super-bright LEDs make the RedBat your go-to taillight for being seen. Solid and flashing visibility options for day and night riding. - 3 LEDs under a red lens (1 lumen) - 4 functions: steady, flashing, chasing, random - 19–40mm diameter bracket - Also works clipped to a bag/waistband - 2 AAA batteries included - Runtimes/Modes: 70 hours in Solid mode, and 160-250 hours in Flashing mode
The Superflash 65 brings a whole new level of versatility to battery powered tail lights. With four modes (High, Low, Courtesy and Superflash) this tail light provides 65 lumens and 220° of visibility that will get you noticed day or night. - Cree XBD and high output surface mounted LEDs provide 65 lumen output with high, low, Courtesy and Superflash modes - FL1 Tested - Run times: 40 hrs (high – 30 lm), 90 hrs (low – 7 lm), 45 hrs (Courtesy - 20-60 lm) and up to 130 hrs (Superflash - 65 lm) - Provides 220° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP64 standard - 2 AAA batteries (included) - Includes seat post and seat stay mounts and horizontal clip mount for multiple mounting options - 70 grams
The 65R is the Superflash tail light on steroids. The Cree XBD LED delivers 65 lumens of brilliance and 220° of visibility to get you noticed day and night. - Cree XBD and high output surface mounted LEDs provide 65 lumen output with high, low, Courtesy and Superflash modes - FL1 Tested - Run times: 7 hrs (high – 30 lm), 12 hrs (low – 7 lm), 5.5 hrs (Courtesy - 13-40 lm) and up to 11.5 hrs (Superflash - 65 lm) - Provides 220° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP65 standard - 550 mAh lithium polymer battery charges in 2.5 hours with micro USB cable (included) - Smart Charging Technology with built-in low battery indicator - Includes Quick Strap seat post mount - 52 grams
The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h
Safety is job #1 and the Vya Series delivers premium safety with the convenience commuters love. Vya Switch is the latest addition to the Vya Family, foregoing auto on/off technology for a traditional button design. Why the new design? We had multiple requests from riders who loved the power and simple effectiveness of our Vya taillight but wanted to adjust runtime or change to a solid mode for group riding and bike path commutes. The button control also allows cyclocross and mountain bikers who hit pavement en route to the dirt the ability to turn the light on/off as needed. Oh yeah, did we mention the purists who are so accustomed to manually turning their lights on and off that not doing so creates that 'Did I forget Something' feeling? Yes control freaks – Vya Switch is for you! - 100 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Switch control provides multiple modes for longer runtime plus a solid mode perfect for bike paths/group rides - Designed for traditionalists, Vya Switch is turned on/off by button (does not have the auto on/off feature of other Vya Lights) - SafePulse beam pattern scientifically designed to enhance a passing driver's ability to judge the cyclist's distance and direction of travel without the risks associated with flashing lights - Horizontal design with custom optic gives a powerful, concentrated burst of light to be recognizable over 2KM away – perfect for road cyclists - 100 lumen SafePulse output maintains safety for a full 6 hours; for all-day adventures switch to 50 lumen SafePulse mode for an impressive 12 hours runtime - Ultra-compact mount with durable rubber strap designed to be compatible with various size seat posts and can even be attached to seat stays - USB Mount Receptor allows light to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock - Direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) - Lumens: 100 (high), 50 (medium), 25 (low), 100 (SafePulse) - Runtime: 360 min (high), 720 min (medium), 240 min (low), 360 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min - Fast Charge: No - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter(s) - Impact Resistance (FL-1): 1 meter - Product Weight: 30 grams - Product Dimensions: 2.6" x 1.3" x 0.8" - Compatible Mounts: Seat Post
Page 1 of 4 Next page