Accessories

- Easy-to-read 3.0" gauge - AutoHead™ with ball inflator accessories - Aluminum barrel and plastic base - 160psi rating

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions. - Attachments: Rear rack deck - Material: Engineering grade polymer - Max Load: Limited to rack max loading rating - Size: 32 x 9.4 x 6.1cm - Weight: 230g / 8.11oz Compatibility - Fits rear rack without top plate and spring clip, - Rear rack width 90mm - 120mm, - Rack tubes, 10mm to 12mm diameter - Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets *Racktime is a registered trademark of tubus carrier systems GmbH.

Fear no rain shower with Bontrager's Ride Wallet. This waterproof case keeps your phone nice and dry in the nastiest weather. Your phone's touch screen works through the clear material and calls remain clearly audible even when in the wallet.

An absolute masterpiece, this cage screams style. The Fly Cage Ano’s clean lines and laser etched design really stand out. No cage outperforms the Fly Cage Ano with its LockTight wing design, that holds bottles securely while keeping them accessible. - 100% anodized aluminum - LockTight Wings - Laser etched design - Road and MTB approved - High-end and durable

Giant's Gateway Bottle Cages use 5mm-thick tubular aluminum for a safe, secure, and rattle-free hold on your bottles.

Step up to Tifosi's Podiums and enjoy the amazing view! With an open, frameless design and a large, impact-resistant, polycarbonate lens, these great specs offer a wide, unobstructed field of vision and maximum protection from debris. These stylish, lightweight shades boast Tifosi's exceptionally tough Grilamid frames and include three easily interchangeable lenses, so you can see clearly in any light condition. And, you'll love the hydrophilic rubber temples and nose pads that adjust in all directions and grip better when wet for a comfortable fit that stays put.

For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal. - Pack of 10, fits 9/16" pedals.

5 mm steel bars, with extra soft 2-components coating to prevent damage to the bicycle‘s paintwork The bars, the case, the links as well as supporting elements of the locking system are made of special hardened steel Alarm of at least 100 dB for 15 seconds Alarm function on basis of the ABUS 3D detection system that means, that every movement is detected Intelligent alarm – In case of small and short movement, e. g. the bike gets hit by a football, the lock only gives a short warning tone Different acoustic signals inform about battery, activation and alarm status Bars are linked with special rivets ABUS Plus cylinder for high protection against manipulations, e.g. picking

Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds

The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts

Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)

The Sport is basically a modified Dave-O shape, made of nylon-reinforced plastic. Sports are as tough as nails and hold bottles well in all conditions and any application. They have two sets of mounting holes to allow the best fit possible. We consider this cage as good as anything we make, it's just made out of different stuff. - Weight: 47 grams

BiKASE's Handy Andy holds all iPhones (in and out of cases), Androids, such as Motorola's Bionic and Razor, the Samsung Galaxy and many more phones. It quickly, easily and securely mounts with the neoprene Velcro straps. Simply wrap them around your handlebars, stem, frame top tube, or even your backpack for easy access to your smart phone while riding. No tools are required! This phone pouch makes calling or navigating with a GPS or training app simple. The see-through window allows viewing information while keeping your phone or device protected and lets you easily operate the touch screen and talk, too, with the phone in the case. A removable pad is included for those really thick phones. • Removable straps to use as cycling wallet. • Mounts on stem or top tube • Mounts on backpacks, messenger bags, strollers, grocery cart, etc. • Reflective logo • 2 Way Zipper Pull • Material: 840 denier nylon/TPU cover • 6.00 x 3.38 x 1-inches • 100 grams

The Sigma Pure 1 ATS is a purist amongst all bicycle computers. In one easy to read display, it answers the three most important cycling questions: How fast? How far? How long? And it does so in a very compact and attractive design. - The Pure 1 ATS is a coded wireless computer. ATS refers to Sigma's own analog encoded wireless transmission system - Incredibly legible - the Pure 1 has a very large 29 x 45mm display that facilitates reading for everyone; especially those with less than perfect vision - Switch between the trip view and the totals view with just one touch of the button - This sleek design sets new standards when it comes to blending in with the bike - The flat handlebar mount was designed specifically to match the thin profile of the PURE 1 ATS computer, sitting flush on the handlebar or stem, making the computer look like it is part of the bike itself. - Includes a single piece spoke magnet that fits all common size spoke sizes and easily attaches without tools - PURE 1 ATS records the speed using the analog transmission system (ATS) transmitter, which wirelessly transmits the data to the computer

BiKASE's Koozie Container holds cans, bottles, or anything you want to keep dry. With its hook-and-loop straps, it mounts just about anywhere on your bike. It's made of durable plastic with a large top for easy access that snaps closed, and it has been proven on hard-core rides to remain sealed. The Koozie is easy to clean, too, and can't mildew like containers made of fabric! • Material: TPU with Hypalon straps • Size: 5 x 3-inches • Volume: 40 cubic inches • Weight: 200 grams

Want an easy way to get your groceries (and other things) home on your bike? Check out Giant's Grocery Getter Basket Pannier. This top-loader carries over 1,200 cubic inches of goodies. In fact, you can drop a standard grocery bag right in the top. When you're not using it the Grocery Getter folds flat for easy transportation. The shoulder strap makes it easy to carry into the store, and internal suspension straps support heavy loads.

• Mounts inside handlebar grips • Optional hand-held use

Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 48g

This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.

Caffeinated Tailwind meets all your calorie, hydration, and electrolyte needs just like you'd expect, plus it adds 35mg of caffeine per 100 calories. Caffeine is proven to significantly enhance high-intensity and endurance performance. - Caffeine boost when you need that extra kick - Complete calories, electrolytes, and hydration: Ditch the gels, chews, and pills, and go all day with just Tailwind. - No gut bombs: Stomach problems? You’ll love Tailwind. Unless you enjoy being doubled over, retching. - Tasty all day: Clean, light flavors taste better the longer you go. - Hydration pack love: Dissolves on contact and cleans up with a quick rinse. No film, aftertaste or science experiments! - All natural: Crystal clear with no dyes, preservatives or 4-syllable magical ingredients. USAGE Usage is similar to regular Tailwind except that we recommend limiting continuous use to 6 hours or less to avoid building up a high concentration. Each scoop contains 100 calories and 35mg of caffeine. For endurance workouts, mix 2-3 scoops per 24 oz of water per hour. Adjust to your personal calorie needs during training, using hunger as a guide. When it’s dialed in, you’ll feel satisfied and energetic, not hungry or full. On hot days, keep the same calories per hour, but increase water. To use in combo with other foods, reduce Tailwind intake by the calories you’re consuming elsewhere to avoid overloading the gut. For shorter workouts (<2hr), you can use less Tailwind to taste. Tailwind stick packs are perfect for fueling on the go. Just tear and pour into a water bottle for 200 calories of Tailwind goodness, no mess, no fuss.  ALL NATURAL AND ORGANIC INGREDIENTS Non-GMO Dextrose (Glucose), Non-GMO Sucrose, Citric Acid, Sodium Citrate, Sea Salt, Organic Flavor, Potassium Chloride, Magnesium Citrate, Calcium Carbonate, Organic Caffeine Gluten free/vegan/no soy/no dairy

Sunlite's Handlebar Mount Bottle Cage lets you attach a water bottle to your handlebars for easy access. Its lightweight design is good for road and mountain use.

- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install

Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)

Lezyne's Flow Cage SL is made from a fiber reinforced Composite Matrix material for low weight, strength, and reliability. And, it loads from the side for added convenience — especially on compact frames or full suspension bikes! It is available in both left-side and right-side loading configurations.

Everybody knows you can't really shred without a solid power stance. The Power Stance kickstand is the whammy bar of kickstands. Take your city shred session to the next level when you slam down the Power Stance. WEOW WEOW! Built with e-bikes, cargo bikes, touring bikes and commuters in mind, the Power Stance is incredibly sturdy. The length is adjustable by the push of a button for quick installation and easy adjustment if parked on uneven ground. Lean easy for years to come with the ultra burly Power Stance kickstand. - Direct mount version - Burly construction is great for supporting heavy bikes - Adjust the length with the press of a button - Durable composite foot - Lifetime PDWarranty

- Adjusts rear wheel for centering in frame - Size: 3/8" - Color: Silver

Precision CNC machined dual-sided aluminum tool for the installation and removal of 12- and 36-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8-inch drive. Fits Praxis M30 and M35 - M30: 12-notch 48mm OD cup - M35: 36-notch 51.7mm OD cup

Use FuelBelt's Bike Gel Flask Holder to keep energy gel within easy reach. Made from tough nylon, it quickly and easily attaches to your top tube with wide hook-and-loop straps and holds one gel flask (included).

- Amp Human, PR Lotion - External lotion designed to maximize training & recovery - Natural bicarb electrolyte that improves muscle function & combats fatigue - Clean sport compliant - Made in the USA

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

Do you have an integrated stem or have cables entering your top tube? Do you have top tube bolt bosses? Introducing Xlab's Stealth Pocket 500. Aerodynamically designed with a perfect 5:1 ratio which means no aero disadvantage. Testing has found without a Stealth Pocket 500, you lose up to 2 minutes in a race. Features a specially designed insert to maintain the aero form of the bag as you stuff it with your vital nutrition! Non-slip grip underneath bag ensures the bag stays put for up-front, easy access. Easy-slide, dual rubber zipper pull allows you to get your nutrition however it is more comfortable for you. Silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. Can carry up to 6 gels.

- Easy-to-use quick release bracket for Surelock Flex Coil Cable

PowerTap's Bluetooth Smart Dual Speed/Cadence Sensor gives you the ability to monitor your speed and cadence with your favorite Bluetooth-compatible device. It's sleek and easy to mount on your frame.

Destined to become a classic, Park Tool's Master Spoke Wrench is an investment cast workhorse poured from the best steel, precisely machined, heat treated for hardness, then polished and plated. The result is a smooth, solid, perfectly balanced steel spoke wrench designed and built to fit perfectly in your hand and provide years of every day service. The SW-22.2 is a three-sided spoke wrench the same size as the SW-2 (red) for .136” (3.45mm) nipples. Weight: 39g

At just 440g, the BORDO Lite 6055C Mini is a lightweight lock that offers the perfect security-to-weight ratio. Due to its small size, the BORDO Lite Mini easily fits into jersey pockets. And, thanks to the individually configurable digit code, you no longer have to take an additional key with you during bike rides. - Special steel design with color-coordinated plastic casing to prevent damage to the bike's paint - The bars and housing are manufactured using particularly lightweight materials and steel alloys - Bars connected with special rivets - Two-component number tumblers guarantee long-term readability of the digits - Individually configurable code - Perfect security-weight ratio

Easily transfer your Forerunner 910XT from wrist to handlebar as you go from running to riding. The Quick Release Kit takes just seconds to mount and comes with a quick release bracket, two bike mounts, and two extra pins.

The Universal Aerodrink Bracket fastens quickly and easily to your aerobar extensions using secure Velcro straps. It's compatible with Profile Design's Aerodrink, Insulated Aerodrink, and Aquacell systems (all sold separately).

- Consumer grade water-based silicone bicycle polish - Safe on all parts including carbon - Protects against uv rays, water and dirt

Finish Line's Stanchion Fluoro Oil drastically reduces suspension fork "stiction" to improve your fork's freedom of movement. Stanchion Fluoro Oil is pure fluoropolymer oil — so slippery it even improves the surface slip of Teflon-coated surfaces! Plus, it conditions and protects seals and O-rings to help your fork work better longer. And, you can even use it on derailleur pivots and cables.

Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.

You'll look and feel fast in Tifosi's Veloce Fototec Reader glasses. These sharp shades boast Tifosi's exceptionally tough Grilamid frames that stand up to years of daily use. Boasting their Fototec lenses that automatically adjust to changing lighting conditions for constantly clear vision, these lightweight specs also include bifocal lenses with +1.5 or +2.0 magnification to make bike computers, maps, and anything else appear big and clear. Their open-frame design and large, impact-resistant, polycarbonate lenses offer a wide field of vision and protect you from debris, while the lens vents ensure fog-free vision. And, you'll love the hydrophilic rubber temples and nose pads that adjust in all directions and grip better when wet for a comfortable fit that stays put.

Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

- Handlebar cage mounting bracket allows any bottle cage to be firmly attached to handlebars - Compatible with handlebars from 22mm to 36mm

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Add some flair and fun to kids' bikes with MSW Squeeze Horns. - Fits standard 22-26mm diameter handlebars - Approximately 3" wide

The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.

Keep your stuff safe with Kryptonite's Laminated Steel Padlock. It sports a double deadbolt locking mechanism and a hardened steel shackle for serious strength and protection.

BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access. • Material: POM head, PP bracket, Stainless steel hardware • Size: 8cm x 6cm x 2cm • Weight: 40 g • Fits handlebar 24mm-32mm • Versatile bracket rotates

E-Bike Chain Wax uses the same proven and trusted, biodegradable wax/water emulsion technology as normal Squirt Chain Lube and is fortified with specialized high-pressure friction modifiers. - Slightly more slick than the original chain lube as this enables E-Bike Chain Wax to handle higher torque pressure and last longer in wet riding conditions than other wax based lubricants - Does not attract dirt or grime to your chain and no degreasing is required or recommended - 100% biodegradable

The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

Carve out some time to get outside in Slice! The frameless shield lens provides an unrestricted view with total protection from harmful UV rays. Be ready for whatever your environment throws at you with three lenses: Clarion Blue for sunny conditions, AC Red for better contrast on partly cloudy days, and clear to shield your eyes from the elements when a tint is not needed. - Frame: Light & Durable Grilamid TR-90 - Lens: Clarion Blue / AC Red / Clear – Shatterproof polycarbonate interchange lenses for bright and low light scenarios - Features: Rimless shield, fully adjustable nose & ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Small-Medium | Weight: 29G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag

- Powder-coated steel construction - Rubber carrying handle - Quick-release handlebar-mounting system for 22.2mm and 31.8mm handlebars

The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.

Skratch Labs Anytime Energy Bar is made with real ingredients such as fruits, nuts and quinoa. It has enough fuel to power you through endurance workouts and is tasty enough to be used as a snack any time of day.

Skratch Labs Sport Recovery Mix is a high calorie food that you can drink. It’s designed to be a very convenient way for you to consume a lot of delicious calories with an optimal ratio of carbohydrate, protein, fat, and salt to refuel and rehydrate you immediately after your longest and hardest workouts when you don’t have access to a freshly prepared meal from scratch.

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

The Garmin XL Computer mount is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer, specifically designed to accommodate the EDGE 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that K-Edge's replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-Edge provides free replacement inserts, as needed. Attributes (specs): - CNC Machined 6061 T6 Aluminum - Compatibility – 31.8mm and 35mm diameter handlebars - New clamp design is hinged for ease of installation - Supported Computers – Garmin Edge 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models. - Combo Compatible – Add the Action Camera Adapter or the complete Combo Mount for the added benefit of using both a computer and GoPro style interface action camera or

- Great for storage or transportation - Can be mounted vertically or horizontally - Alloy construction